SP7730GA_WWD_[NAND_b256k]_E62_4.4.2_E62_HW1_V8_E62

 Symphony E62 Stock Rom/Symphony E62 Flash File

SP7730GA_WWD_[NAND_b256k]_E62_4.4.2_E62_HW1_V8_E62

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 85 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name  : scx35_sp7730ga_wwd_project
Model Brand : Symphony
Model Device: E62
AndrVersion : 4.4.2
BaseBand CPU: SP7730GA_WWD
Project Ver : E62_HW1_V8
Model Ext   : E62

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 308 MiB
Saved to : E:\CM2 Backup\SP7730GA_WWD_[NAND_b256k]_E62_4.4.2_E62_HW1_V8_E62\
Done!

Elapsed: 00:05:25

Reconnect Power/Cable!