PEACE PP10 Ultra MT6580 Official Factory Flash File Firmware Stock

MT6580__alps__PP10_Ultra__dwzn__5.1__V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 41 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42019863D8EF51E9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42019863D8EF51E9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x2743759B4231C0DF6099F579C9FD69F7
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_dwzn
ProdModel : PP10 Ultra
Device    : dwzn
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18

[Read Ok] : preloader_dwzn.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / dwzn / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1390 MiB
Scatter saved to : D:\CM2\MT6580__alps__PP10_Ultra__dwzn__5.1__V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18\

All done!

Done!
Elapsed: 00:07:00
Reconnect Power/Cable!

Kimfly ES Flash File SP7731CEA_Unite-U1_6.0_Myphone-Unite_U1-Android-6.0-V1.0-20171111_Unite_U1

SP7731CEA_Unite-U1_6.0_Myphone-Unite_U1-Android-6.0-V1.0-20171111_Unite_U1

- > Wait phone connected ...

Phone found! [ 63 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Unite U1
Model Brand : Myphone
Model Device: Unite-U1
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : Myphone-Unite U1-Android-6.0-V1.0-20171111
Model Ext   : Unite U1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1940 MiB
Saved to : C:\Users\SERVER02\Desktop\SP7731CEA_Unite-U1_6.0_Myphone-Unite_U1-Android-6.0-V1.0-20171111_Unite_U1\
Done!

Elapsed: 00:06:11

Reconnect Power/Cable!