Q381_Q381_5.1_MMX_Q381_SW_V009_HW_V1.0_18032016_Micromax_Q381

Q381_Q381_5.1_MMX_Q381_SW_V009_HW_V1.0_18032016_Micromax_Q381

- > Wait phone connected ...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Q381
Model Brand : Micromax
Model Device: Q381
AndrVersion : 5.1
BaseBand CPU: Q381
Project Ver : MMX_Q381_SW_V009_HW_V1.0_18032016
Model Ext   : Micromax Q381

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.43.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2287 MiB
Saved to : C:\Users\SERVER02\Desktop\CM2 Read\Q381_Q381_5.1_MMX_Q381_SW_V009_HW_V1.0_18032016_Micromax_Q381\
Done!

Elapsed: 00:06:30

Reconnect Power/Cable!

P5210 Firmware 4Files

P5210XXUBNK2_ILOBNK1_Repair_Firmware_4Files

AP_P5210XXUBNK2_CL3241387_QB2924226_REV00_user_low_ship.tar.md5

BL_P5210XXUBNK2_CL3241387_QB2924226_REV00_user_low_ship.tar.md5

CSC_ILO_P5210ILOBNK1_CL3241387_QB2957132_REV00_user_low_ship.tar.md5

GT-P5210_EUR_XX_20130523.pit

P5210XXUBPF1_FTMBPF1_Repair_Firmware_4Files

N9005 Stock Rom

N9005XXSGBPL6_N9005SERGBOJ1_N9005XXUGBOJ1_HOME

MT6753_HTC Desire 728_Android5.1_LMY47D release-keys_20170604_165427

MT6753_HTC Desire 728_Android5.1_LMY47D release-keys_20170604_165427

 Action : Read Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM37 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 0337
 CPU_SW: 0000
 CPU_HW: CA00
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 150100523832314D42
 CHIP     : MT6753
 CPU ID   :
 EMMC ID  : 150100523832314D42
 EMMC Size: 16GB,  usable capacity: 14.57GB
 EMMC Name: eMMC_Samsung_R821MB
 Read Hardware Information is done.

 Reading Project Property ...
 done.
 Making dir: C:\Users\SERVER02\Desktop\CM2 Read\MT6753_HTC Desire 728_Android5.1_LMY47D release-keys_20170604_165427\...[ok]
 Reading preloader ......ok
 New EMI config is detected, auto added it to User Database, cnt=4
 Saved to: C:\CS-Tool\CST_MainSoftware\private\db\emi\
 Reading nvram ......ok
 Reading lk ......ok
 Reading secro ......ok
 Reading logo ......ok
 Reading tee1 ......ok
 Reading tee2 ......ok
 Reading cache ......ok
 Reading boot ......ok
 Reading recovery ......ok
 Reading system ......ok
 Reading userdata ......ok
 All done.
 Files saved to: C:\Users\SERVER02\Desktop\CM2 Read\MT6753_HTC Desire 728_Android5.1_LMY47D release-keys_20170604_165427\

 Action completed
 Time taken : 00:05:02
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.57.1

MT6735M__Lenovo__Lenovo_A2010-a__A2010-a__5.1__A2010-a-t_USR_S261_1607142300_MP3V1_8G_ROW

MT6735M__Lenovo__Lenovo_A2010-a__A2010-a__5.1__A2010-a-t_USR_S261_1607142300_MP3V1_8G_ROW

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 37 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32323758E80042692083D0
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D4200E858D0837369
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D965B8922F7F7BCE844F0037975
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Lenovo
ProdName  : A2010-a
ProdModel : Lenovo A2010-a
Device    : A2010-a
AndroidVer: 5.1
MTKxCPU   : MT6735M
MTKxPRJ   : A2010-a-t_USR_S261_1607142300_MP3V1_8G_ROW

[Read Ok] : preloader_al712row.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / al712row / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2272 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6735M__Lenovo__Lenovo_A2010-a__A2010-a__5.1__A2010-a-t_USR_S261_1607142300_MP3V1_8G_ROW\

All done!

Done!
Elapsed: 00:09:21
Reconnect Power/Cable!

MT6735__Symphony__H400__H400__6.0__alps-mp-m0.mp1-V2.39.1_pri6735.65u.m0_P35

MT6735__Symphony__H400__H400__6.0__alps-mp-m0.mp1-V2.39.1_pri6735.65u.m0_P35

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238EC2E004277BBEDCE
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42002EECCEED7377
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xA0E63D967939F1463D7370B198D2F2DB
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : H400
ProdModel : H400
Device    : H400
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : alps-mp-m0.mp1-V2.39.1_pri6735.65u.m0_P35

[Read Ok] : preloader_pri6735_65u_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / pri6735_65u_m0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2697 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6735__Symphony__H400__H400__6.0__alps-mp-m0.mp1-V2.39.1_pri6735.65u.m0_P35\

All done!

Done!
Elapsed: 00:09:28
Reconnect Power/Cable!

MT6589__alps__eastaeon89_wet_kk__eastaeon89_wet_kk__4.4.2__ALPS.KK1.MP5.V1.3

MT6589__alps__eastaeon89_wet_kk__eastaeon89_wet_kk__4.4.2__ALPS.KK1.MP5.V1.3

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : alps
Device Model   : eastaeon89_wet_kk
Device CPU     : MT6589
Device IntName : eastaeon89_wet_kk
Device Version : 4.4.2
Device Compile : 05/12/2016 13:12:14
Device Project : ALPS.KK1.MP5.V1.3
Device ExtInfo : eastaeon89_wet_kk

MT6753__WALTON__Primo_RM3s__Primo_RM3s__7.0__Primo_RM3s_T_W170509_V06

MT6753__WALTON__Primo_RM3s__Primo_RM3s__7.0__Primo_RM3s_T_W170509_V06

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D42315895230742ABBCF0CA
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D42072395CAF014AB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xA0E63D96015451DB15549803F696F349
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : WALTON
ProdName  : Primo_RM3s
ProdModel : Primo RM3s
Device    : Primo_RM3s
AndroidVer: 7.0
MTKxCPU   : MT6753
MTKxPRJ   : Primo_RM3s_T_W170509_V06

[Read Ok] : preloader_kon6753_e2x_66_53_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6753 / V1.1.2 / kon6753_e2x_66_53_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3662 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6753__WALTON__Primo_RM3s__Primo_RM3s__7.0__Primo_RM3s_T_W170509_V06\

All done!

Done!
Elapsed: 00:13:20
Reconnect Power/Cable!

MT6582__WALTON__Primo_GH+___4.2.2__ZA820AA_102A_V8_0_3_GH_Plus

MT6582__WALTON__Primo_GH+___4.2.2__ZA820AA_102A_V8_0_3_GH_Plus

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : WALTON
Device CPU     : MT6582
Device Version : 4.2.2
Device Compile : 4/4/2014 2:17:51 AM
Device Project : ZA820AA_102A_V8_0_3_GH_Plus
Device ExtInfo : Primo GH+

MT6582__SMILE__N5__SMILE__4.4.2__ALPS.KK1.MP1.V2.11

MT6582__SMILE__N5__SMILE__4.4.2__ALPS.KK1.MP1.V2.11

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : SMILE
Device Model   : SMILE
Device CPU     : MT6582
Device IntName : N5
Device Version : 4.4.2
Device Compile : 6/22/2015 6:09:44 AM
Device Project : ALPS.KK1.MP1.V2.11
Device ExtInfo : N5

MT6582__Lenovo__LenovoA3300-HV__A3300-HV__4.4.2__A3300HV_A442_01_23_150104_ROW

MT6582__Lenovo__LenovoA3300-HV__A3300-HV__4.4.2__A3300HV_A442_01_23_150104_ROW

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Lenovo
Device Model   : A3300-HV
Device CPU     : MT6582
Device IntName : A3300-HV
Device Version : 4.4.2
Device Compile : 1/4/2015 2:20:25 AM
Device Project : A3300HV_A442_01_23_150104_ROW
Device ExtInfo : LenovoA3300-HV

MT6589__samsung__SM-J500H__j53g__5.1.1__ALPS.JB2.MP.V1.16

MT6589__samsung__SM-J500H__j53g__5.1.1__ALPS.JB2.MP.V1.16 

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : samsung
Device Model   : j53g
Device CPU     : MT6589
Device IntName : j53gxx
Device Version : 5.1.1
Device Compile : 13/01/2016 02:36:26 �
Device Project : ALPS.JB2.MP.V1.16
Device ExtInfo : SM-J500H

MT6582__Samsung__SM-J700H__Galaxy_J7__4.2.2__J8270_4.2_V1.3

MT6582__Samsung__SM-J700H__Galaxy_J7__4.2.2__J8270_4.2_V1.3

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Samsung
Device Model   : Galaxy J7
Device CPU     : MT6582
Device IntName : SM-J700H
Device Version : 4.2.2
Device Compile : 8/3/2016 10:04:26 AM
Device Project : J8270_4.2_V1.3
Device ExtInfo : SM-J700H

MT6582__Samsung__Galaxy_J_Max__Galaxy_J_Max__4.2.2__J8280_J1M_4.2_V1.4

MT6582__Samsung__Galaxy_J_Max__Galaxy_J_Max__4.2.2__J8280_J1M_4.2_V1.4

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Samsung
Device Model   : Galaxy J Max
Device CPU     : MT6582
Device IntName : Galaxy J Max
Device Version : 4.2.2
Device Compile : 15/02/2017 07:16:34
Device Project : J8280_J1M_4.2_V1.4
Device ExtInfo : Galaxy J Max

MT6582__alps__mbk82_wet_kk__mbk82_wet_kk__4.4.2__ALPS.KK1.MP1.V2.11

MT6582__alps__mbk82_wet_kk__mbk82_wet_kk__4.4.2__ALPS.KK1.MP1.V2.11

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : alps
Device Model   : mbk82_wet_kk
Device CPU     : MT6582
Device IntName : mbk82_wet_kk
Device Version : 4.4.2
Device Compile : 2/27/2017 1:32:43 PM
Device Project : ALPS.KK1.MP1.V2.11
Device ExtInfo : mbk82_wet_kk

মজার, বিস্ময়কর ও আশ্চর্যজনক তথ্য সমগ্র Funny and Surprising Facts Part 2

মজার, বিস্ময়কর ও আশ্চর্যজনক তথ্য সমগ্র Funny and Surprising Facts Part 1

MT6580__X6__X6__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P35

MT6580__X6__X6__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P35

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420296600A12F5339
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420296600A12F5339
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D9670C3CA165196801BF3594026
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : X6
ProdName  : X6
ProdModel : X6
Device    : magc6580_we_l
AndroidVer: 5.1
CU_SWVer  : V1.0.4
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_MAGC6580.WE.L_P35

[Read Ok] : preloader_magc6580_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_we_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1284 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\New folder\MT6580__X6__X6__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P35\

All done!

Done!
Elapsed: 00.08.36
Reconnect Power/Cable!

MT6580__Symphony__V46__V46__5.1__RS618P_V46_V16.0_20170314

MT6580__Symphony__V46__V46__5.1__RS618P_V46_V16.0_20170314 hw3

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454534454134010CC2E72BB3C7
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 4AE4E
[eMMC] : FLASH_CID : 700100454534454134010CC2E72BB3C7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E2000000
[eMMC] : FLASH_UCP : 3616 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D9679CB4CF8BCB77856A300C190
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : V46
ProdModel : V46
Device    : V46
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : RS618P_V46_V16.0_20170314

[Read Ok] : preloader_rs618.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / rs618 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1425 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__Symphony__V46__V46__5.1__RS618P_V46_V16.0_20170314\

All done!

Done!
Elapsed: 00.06.58
Reconnect Power/Cable!

MT6580__Symphony__i10__i10__6.0__ALPS.W10.24.p0

MT6580__Symphony__i10__i10__6.0__ALPS.W10.24.p0

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147346132A410664518B37F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GA
[eMMC] : FLASH_CID : 90014A484147346132A410664518B37F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xA0E63D96332555BE777439319A353D0A
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : i10
ProdModel : i10
Device    : i10
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_p4200.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / p4200 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1958 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__Symphony__i10__i10__6.0__ALPS.W10.24.p0\

All done!

Done!
Elapsed: 00.12.55
Reconnect Power/Cable!

MT6580__SYMPHONY__H60__H60__5.1__ALPS.L1.MP6.V2_RGK6580.WE.L_P2 V9

MT6580__SYMPHONY__H60__H60__5.1__ALPS.L1.MP6.V2_RGK6580.WE.L_P2 V9

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : SYMPHONY
Device Model   : H60
Device CPU     : MT6580
Device IntName : SYMPHONY
Device Version : 5.1
Device Compile : 5/6/2016 6:15:20 AM
Device Project : ALPS.L1.MP6.V2_RGK6580.WE.L_P2
Device ExtInfo : H60

MT6580__NEO7__NEO7__NEO7__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

MT6580__NEO7__NEO7__NEO7__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110129FA05D9A2A7
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110129FA05D9A2A7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D96F2354AE1B28F49D0353C27BE
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : NEO7
ProdName  : NEO7
ProdModel : NEO7
Device    : NEO7
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 935 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__NEO7__NEO7__NEO7__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!

Done!
Elapsed: 00.07.24
Reconnect Power/Cable!

MT6580__Micromax__Micromax_Q386__Q386__6.0__ALPS.W10.24.p0

MT6580__Micromax__Micromax_Q386__Q386__6.0__ALPS.W10.24.p0

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463832324D4200BF7F9B9C5353
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM228
[eMMC] : FLASH_CID : 150100463832324D4200BF7F9B9C5353
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xA0E63D96AD1E64FA629E7F8921EB4A31
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Micromax
ProdName  : Q386
ProdModel : Micromax Q386
Device    : Q386
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_v3750.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3750 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2730 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6580__Micromax__Micromax_Q386__Q386__6.0__ALPS.W10.24.p0\

All done!

Done!
Elapsed: 00:18:16
Reconnect Power/Cable!

MT6580__Micromax__Micromax_Q354__Q354__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m_P19

MT6580__Micromax__Micromax_Q354__Q354__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m_P19

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 37 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847346192A20B9148E834D9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , ’a4G8
[eMMC] : FLASH_CID : 90014A483847346192A20B9148E834D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D96C702404C4E1843E58A021E8C
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Micromax
ProdName  : Q354
ProdModel : Micromax Q354
Device    : Q354
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_esky6580.we.c.m_P19

[Read Ok] : preloader_esky6580_we_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / esky6580_we_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2076 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6580__Micromax__Micromax_Q354__Q354__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m_P19\

All done!

Done!
Elapsed: 00:13:44
Reconnect Power/Cable!

MT6580__K1__K1__K1__6.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

MT6580__K1__K1__K1__6.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473A43DD66B6B1FB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A43DD66B6B1FB
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D96380F2273455CDCC2264B25CD
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : K1
ProdName  : K1
ProdModel : K1
Device    : K1
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 755 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__K1__K1__K1__6.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!

Done!
Elapsed: 00.07.12
Reconnect Power/Cable!

MT6580__E-tel__E-tel_Q2__E-tel_Q2__5.1__ALPS.L1.MP6.V2.32_FAJUE8321.EMMC_P8

MT6580__E-tel__E-tel_Q2__E-tel_Q2__5.1__ALPS.L1.MP6.V2.32_FAJUE8321.EMMC_P8

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 37 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7C0100454D533030383AB910580F7363
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x7C , OEM : 0100
[eMMC] : FLASH_INF : [NOT_IN_BASE] , 800SM
[eMMC] : FLASH_CID : 7C0100454D533030383AB910580F7363
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001CCD80000
[eMMC] : FLASH_UCP : 7373 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D963EF697460A7D5A3BF989ADBD
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : E-tel
ProdName  : E-tel Q2
ProdModel : E-tel Q2
Device    : E-tel Q2
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.32_FAJUE8321.EMMC_P8

[Read Ok] : preloader_p706b.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / p706b / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 916 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6580__E-tel__E-tel_Q2__E-tel_Q2__5.1__ALPS.L1.MP6.V2.32_FAJUE8321.EMMC_P8\

All done!

Done!
Elapsed: 00:07:08
Reconnect Power/Cable!

MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20

MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E20100000F9EFC381
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E20100000F9EFC381
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D9667F84B6B4154416B471D2F87
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : R8s
ProdModel : R8s
Device    : R8s
AndroidVer: 6.0
CU_SWVer  : V1.0.4
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20

[Read Ok] : preloader_magc6580_weg_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_weg_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1012 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20\

All done!

Done!
Elapsed: 00.10.11
Reconnect Power/Cable!

MT6580__alps__P9__p9__6.0_marshmallow__ALPS.L1.MP6.V2.19_BEST6580.WEG.L

MT6580__alps__P9__p9__6.0_marshmallow__ALPS.L1.MP6.V2.19_BEST6580.WEG.L

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344732611101506698F433F9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A48344732611101506698F433F9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D9630D630839507C5141B853C6C
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_p9
ProdModel : P9
Device    : p9
AndroidVer: 6.0_marshmallow
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_BEST6580.WEG.L

[Read Ok] : preloader_p9.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / p9 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 770 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__alps__P9__p9__6.0_marshmallow__ALPS.L1.MP6.V2.19_BEST6580.WEG.L\

All done!

Done!
Elapsed: 00.07.09
Reconnect Power/Cable!

 

MT6580__8__T738__T738__5.1__ALPS.L1.MP6.V2.19_TX6580.WE.XZ.L

MT6580__8__T738__T738__5.1__ALPS.L1.MP6.V2.19_TX6580.WE.XZ.L

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : 8
Device Model   : T738
Device CPU     : MT6580
Device IntName : T738
Device Version : 5.1
Device Compile : 31/03/2017 03:17:15
Device Project : ALPS.L1.MP6.V2.19_TX6580.WE.XZ.L
Device ExtInfo : T738

MT6577__samsung__SM-J210F__Galaxy_J2(2016)__4.4.4__J7725_SK_4.1_V1.1

MT6577__samsung__SM-J210F__Galaxy_J2(2016)__4.4.4__J7725_SK_4.1_V1.1

Brand     : samsung
ProdName  : Galaxy J2(2016)
ProdModel : SM-J210F
Device    : Galaxy J2(2016)
AndroidVer: 4.4.4
MTKxCPU   : MT6577
MTKxPRJ   : J7725_SK_4.1_V1.1

[Read Ok] : preloader_j7725.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : EBR2
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / j7725 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 456 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\CM2\MT6577__samsung__SM-J210F__Galaxy_J2(2016)__4.4.4__J7725_SK_4.1_V1.1\

All done!

MT6577__samsung__SM-J210F__Galaxy_J2(2016)__4.4.4__J7725_SK_4.1_V1.1

MT6572_NAND_P10__P10__P10__4.4.2__HS_KUNLIN_FOREIGN_F4_P10_V0.1_20170312

MT6572_NAND_P10__P10__P10__4.4.2__HS_KUNLIN_FOREIGN_F4_P10_V0.1_20170312

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xA0E63D9649C704ADB9DB8E5E9DD20B2C
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_q3_m144_b15_kunlin_f4_p10.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / q3_m144_b15_kunlin_f4_p10 / NAND
FW Size : 309 MiB

Brand     : P10
ProdName  : P10
ProdModel : P10
Device    : P10
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HS_KUNLIN_FOREIGN_F4_P10_V0.1_20170312

Android Info saved

Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6572_NAND_P10__P10__P10__4.4.2__HS_KUNLIN_FOREIGN_F4_P10_V0.1_20170312

Done!
Elapsed: 00:03:06
Reconnect Power/Cable!

MT6572_NAND_alps__P100__d31f1__6.0__D31F1_P100_NAND4_2_AGTEL_M06_20170412_1858

MT6572_NAND_alps__P100__d31f1__6.0__D31F1_P100_NAND4_2_AGTEL_M06_20170412_1858

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : alps
Device Model   : d31f1
Device CPU     : MT6572
Device IntName : P100
Device Version : 6.0
Device Compile : 4/12/2017 11:05:03 AM
Device Project : D31F1_P100_NAND4_2_AGTEL_M06_20170412_1858
Device ExtInfo : P100

MT6572_NAND_Airmax__A14___4.4.2__MP.V1.0

MT6572_NAND_Airmax__A14___4.4.2__MP.V1.0

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xA0E63D9612EFEDBD19E692A7EE95B80B
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_s23_72_nand_fwvga_yskj_f3_airmax_44.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / s23_72_nand_fwvga_yskj_f3_airmax_44 / NAND
FW Size : 249 MiB

Brand     : Airmax
ProdName  : A14
ProdModel : A14
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : MP.V1.0

Android Info saved

Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6572_NAND_Airmax__A14___4.4.2__MP.V1.0

Done!
Elapsed: 00.02.40
Reconnect Power/Cable!