MT6580__W1__W1__W1__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

MT6580__W1__W1__W1__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B4A5330304D03FCC505FB60B5
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 1501004B4A5330304D03FCC505FB60B5
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xDF111E2F3C98D331F4130DDE4B2D1397
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : W1
ProdName  : W1
ProdModel : W1
Device    : W1
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

[Read Ok] : preloader_b36a_j3_1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b36a_j3_1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1906 MiB
Scatter saved to : C:\Users\kalam11\Desktop\cm2kalam\MT6580__W1__W1__W1__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\

All done!

Done!
Elapsed: 00:10:04
Reconnect Power/Cable!

MT6580__Zelta__Q200__t836w_v1_ac_kw_s5023_zeita__6.0__Q200_2_XXX_1.0_1.0_01062017

MT6580__Zelta__Q200__t836w_v1_ac_kw_s5023_zeita__6.0__Q200_2_XXX_1.0_1.0_01062017

Device Brand   : Zelta
Device Model   : t836w_v1_ac_kw_s5023_zeita
Device CPU     : MT6580
Device IntName : full_t836w_v1_ac_kw_s5023_zeita
Device Version : 6.0
Device Project : Q200_2_XXX_1.0_1.0_22052017
Device ExtInfo : Q200
Device DisplayID :Q200_2_XXX_1.0_1.0_22052017

Okapia Titan__bd6735m_35g_b_m0__6.0__V05_160906

Okapia Titan__bd6735m_35g_b_m0__6.0__V05_160906

Brand     : Okapia
ProdName  : full_bd6735m_35g_b_m0
ProdModel : Titan
Device    : bd6735m_35g_b_m0
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : V05_160906

[Read Ok] : preloader_bd6735m_35g_b_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / bd6735m_35g_b_m0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2185 MiB

MT6572__Gowin__A8__a831_324_ax_cht_z6_gowin__4.4.2__a831_324_ax_cht_z6_gowin_a8_v1.0

MT6572__Gowin__A8__a831_324_ax_cht_z6_gowin__4.4.2__a831_324_ax_cht_z6_gowin_a8_v1.0

Reading Flash Content now ...

Brand     : Gowin
ProdName  : a831_324_ax_cht_z6_gowin
ProdModel : A8
Device    : a831_324_ax_cht_z6_gowin
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : a831_324_ax_cht_z6_gowin_a8_v1.0

[Read Ok] : preloader_a831_324_ax_cht_z6_gowin.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / a831_324_ax_cht_z6_gowin / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1018 MiB
Scatter saved to : D:\Firmware\MT6572__Gowin__A8__a831_324_ax_cht_z6_gowin__4.4.2__a831_324_ax_cht_z6_gowin_a8_v1.0\

All done!

MT6580__Symphony__SYMTAB25__SYMTAB25__7.0__alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P5

MT6580__Symphony__SYMTAB25__SYMTAB25__7.0__alps-mp-n0.mp2-

V1.23.1_miki8321.tb.n_P5

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100514531334D4207B9639B38C30D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D4207B9639B38C30D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xA0E63D96A500D80DC65838B8CB53A414
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : SYMTAB25
ProdModel : SYMTAB25
Device    : SYMTAB25
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P5

[Read Ok] : preloader_symphony8321_7006.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / symphony8321_7006 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2252 MiB
Scatter saved to : D:\MT6580__Symphony__SYMTAB25__SYMTAB25__7.0__alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P5\

All done!

Done!
Elapsed: 00:13:02
Reconnect Power/Cable!

J500HXXU2BQH2_J500HOXE2BQGB_J500HXXU2BPK2_HOME 6.0

J500HXXU2BQH2_J500HOXE2BQGB_J500HXXU2BPK2_HOME 6.0.tar

J500HXXU2BQH2_J500HOXE2BQGB_J500HXXU2BPK2_HOME 6.0.tar.md5

MT6580__Lava__iris50__iris820__6.0__alps-mp-m0.mp1-V2.34_lava6580.weg.m_P30

MT6580__Lava__iris50__iris820__6.0__alps-mp-m0.mp1-V2.34_lava6580.weg.m_P30

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E58324D4206F69AC4C24409
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D4206F69AC4C24409
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D96F4F562F92D66AE284FF552A5
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Lava
ProdName  : iris820
ProdModel : iris50
Device    : iris820
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_lava6580.weg.m_P30

[Read Ok] : preloader_lava6580_sp511.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / lava6580_sp511 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2209 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\MT6580__Lava__iris50__iris820__6.0__alps-mp-m0.mp1-V2.34_lava6580.weg.m_P30\

All done!

Done!
Elapsed: 00:11:32
Reconnect Power/Cable!

SP7731CEA_A73_6.0_LAVA_A73_S109_20161018_A73

SP7731CEA_A73_6.0_LAVA_A73_S109_20161018_A73

Loading    : SP7731CEA_A73_6.0_LAVA_A73_S109_20161018_A73.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SC7731_eMMC_A73_6.0_LAVA_A73_INFINITY-BOX
FastCheck  : 0x00A13FF34D

Loading files ...

File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731C_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
File : logo_480x854.bin
File : fblogo_480x854.bin
File : boot.img
File : system.img
File : sysinfo.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin
File : Infinity_SC77xx.xml

Load Ok!

SP7731CEA_P11_itel_P11_6.0_P11-W506B-6.0-BD-V014-20170720_itel_P11

SP7731CEA_P11_itel_P11_6.0_P11-W506B-6.0-BD-V014-20170720_itel_P11

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : itel_P11
Model Brand : Itel
Model Device: itel_P11
AndrVersion : 6.0
BaseBand CPU: SP7731CEA_P11
Project Ver : P11-W506B-6.0-BD-V014-20170720
Model Ext   : itel P11

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2825 MiB
Saved to : D:\SP7731CEA_P11_itel_P11_6.0_P11-W506B-6.0-BD-V014-20170720_itel_P11\
Done!

Elapsed: 00:09:03

Reconnect Power/Cable!

MT6580__Symphony__P8_PRO__P8_PRO__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136

MT6580__Symphony__P8_PRO__P8_PRO__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : P8_PRO
ProdModel : P8 PRO
Device    : P8_PRO
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1_tinno6580.we.n_P136

[Read Ok] : preloader_v3760.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3760 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3232 MiB
Scatter saved to : C:\Users\SKYNET\MT6580__Symphony__P8_PRO__P8_PRO__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136\

All done!

Done!
Elapsed: 00:15:45
Reconnect Power/Cable!

MT6580__Symphony__i60__i60__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136

MT6580__Symphony__i60__i60__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : i60
ProdModel : i60
Device    : i60
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1_tinno6580.we.n_P136

[Read Ok] : preloader_v3720.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3720 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3232 MiB
Scatter saved to : C:\Users\MT6580__Symphony__i60__i60__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136\

All done!

Done!
Elapsed: 00:10:47
Reconnect Power/Cable!

N900XXSEBPL3

N900XXSEBPL3

N900XXSEBPL3_N900ODDEBPF1_N900DDUEBPF1_HOME.tar.md5

MT6580__Itel__itel_S11__S11__6.0__alps-mp-m0.mp1-V2.39_rlk6580.we.i.m_P56

MT6580__Itel__itel_S11__S11__6.0__alps-mp-m0.mp1-V2.39_rlk6580.we.i.m_P56

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E58324D42064049B4DF44FD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D42064049B4DF44FD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D968832EDC4D8ABC2C2DE3493A1
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Itel
ProdName  : S11
ProdModel : itel S11
Device    : S11
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.39_rlk6580.we.i.m_P56

[Read Ok] : preloader_rlk6580_we_i_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / rlk6580_we_i_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2623 MiB
Scatter saved to : E:\CM2 Backup\MT6580__Itel__itel_S11__S11__6.0__alps-mp-m0.mp1-V2.39_rlk6580.we.i.m_P56\

All done!

Done!
Elapsed: 00:13:07
Reconnect Power/Cable!

MT6735__WE__X2__X2__6.0__KAAS1X_BGK_En_1.04.A14

MT6735__WE__X2__X2__6.0__KAAS1X_BGK_En_1.04.A14

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D4231583126074201ADB5DE
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D42072631DEB58301
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xA0E63D96DBB6C6A22163C4066DFA09C4
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : WE
ProdName  : X2
ProdModel : X2
Device    : X2
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : KAAS1X_BGK_En_1.04.A14

[Read Ok] : preloader_kon6735_65u_s1_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / kon6735_65u_s1_m0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3066 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\MT6735__WE__X2__X2__6.0__KAAS1X_BGK_En_1.04.A14\

All done!

Done!
Elapsed: 00:09:51
Reconnect Power/Cable!

MT6592__WIKO__SLIDE2__S5260__5.1__ALPS.L1.MP6.V2.15.2_TINNO6592.WET.L_P37

MT6592__WIKO__SLIDE2__S5260__5.1__ALPS.L1.MP6.V2.15.2_TINNO6592.WET.L_P37

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : WIKO
Device Model   : S5260
Device CPU     : MT6592
Device IntName : S5260
Device Version : 5.1
Device Compile : 11/26/2015 12:08:11 PM
Device Project : ALPS.L1.MP6.V2.15.2_TINNO6592.WET.L_P37
Device ExtInfo : SLIDE2

MSM8916__OPPO__OPPO__ANDR_v5.1.1__F1f__F1f__F1f__F1EX_11.A.23_INT_901_201711251117

MSM8916__OPPO__OPPO__ANDR_v5.1.1__F1f__F1f__F1f__F1EX_11.A.23_INT_901_201711251117

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : OPPO
Device Manufact.: OPPO
Device Model    : F1f
Device CPU      : MSM8916
Device IntName  : F1f
Device Version  : 5.1.1
SWVersion       : F1EX_11.A.23_INT_901_201711251117
CU_SWVer        : OPPO
Device Compile  : 11/25/2017 4:25:36 AM
Device ExtInfo  : F1f

MT6572__alps__TAB_9S__m706m_3g_wvga_port__4.4.2__ALPS.KK1.MP7.V1

MT6572__alps__TAB_9S__m706m_3g_wvga_port__4.4.2__ALPS.KK1.MP7.V1

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E43617264204181027522C21F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E43617264204181027522C21F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D96EFE8FB242C56EA1E5E041BA0
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : m706m_3g_wvga_port
ProdModel : TAB 9S
Device    : m706m_3g_wvga_port
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_m706m_3g_wvga_port.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / m706m_3g_wvga_port / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 549 MiB
Scatter saved to : D:\MT6572__alps__TAB_9S__m706m_3g_wvga_port__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:03:50
Reconnect Power/Cable!