SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x164_hotwav_64_4_5.1_T13_HOTWAV_USER_2SIM_64+4_B1_A5_20160813_Venus_X14

SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x164_hotwav_64_4_5.1_T13_HOTWAV_USER_2SIM_64+4_B1_A5_20160813_Venus_X14

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : HOTWAV
Device Model   : scx20_sp7731ceb_t13_x164_hotwav_64_4
Device CPU     : sp7731ceb_t13_x164_hotwav_64_4
Device IntName : sp7731ceb_t13_x164_hotwav_64_4_dt
Device Version : 5.1
Device Compile : 8/13/2016 4:44:58 AM
Device Project : T13_HOTWAV_USER_2SIM_64+4_B1_A5_20160813
Device ExtInfo : Venus X14

SP7731CEA_T13_ZX_64_8_t13_S014_Maximus_64_8_5.1_HWD_20170110_aura_55

SP7731CEA_T13_ZX_64_8_t13_S014_Maximus_64_8_5.1_HWD_20170110_aura_55

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731cea_t13_S014_Maximus_64_8_dt
Model Brand : Maximus
Model Device: t13_S014_Maximus_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731CEA_T13_ZX_64_8
Project Ver : HWD_20170110
Model Ext   : aura 55

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : thirdlogo.bin
[Read Ok] : forthlogo.bin
[Read Ok] : fifthlogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2630 MiB
Saved to : C:\Users\SKYNET\Desktop\New folder\SP7731CEA_T13_ZX_64_8_t13_S014_Maximus_64_8_5.1_HWD_20170110_aura_55\
Done!

Elapsed: 00.12.40

Reconnect Power/Cable!

SP7731GEA_sp7731g_1h10_81_df_df013_we_i8_qhd_6.0_MRA58K_release-keys_L5

SP7731GEA_sp7731g_1h10_81_df_df013_we_i8_qhd_6.0_MRA58K_release-keys_L5

Set mode to : SP [SC773x] eMMC [Generic]

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 16 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 16 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 16 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731g_1h10_81_df_df013_we_i8_qhd
Model Brand : SPRD
Model Device: sp7731g_1h10_81_df_df013_we_i8_qhd
AndrVersion : 6.0
BaseBand CPU: SP7731GEA
Project Ver : MRA58K release-keys
Model Ext   : L5

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.26.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1354 MiB
Saved to : C:\Users\SKYNET02\Desktop\CM2\SP7731GEA_sp7731g_1h10_81_df_df013_we_i8_qhd_6.0_MRA58K_release-keys_L5\
Done!

Elapsed: 00.06.32

Reconnect Power/Cable!

SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS_sp7731c_1h10_32v4_df_df019_c_we_a3_gps_6.0_MRA58K_release-keys_A3

SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS_sp7731c_1h10_32v4_df_df019_c_we_a3_gps_6.0_MRA58K_release-keys_A3

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_32v4_df_df019_c_we_a3_gps
Model Brand : SPRD
Model Device: sp7731c_1h10_32v4_df_df019_c_we_a3_gps
AndrVersion : 6.0
BaseBand CPU: SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS
Project Ver : MRA58K release-keys
Model Ext   : A3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1580 MiB
Saved to : C:\Users\SERVER02\Desktop\CM2 Read\SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS_sp7731c_1h10_32v4_df_df019_c_we_a3_gps_6.0_MRA58K_release-keys_A3\
Done!

Elapsed: 00:05:30

Reconnect Power/Cable!

SMDK4210__samsung__GT-S7562__bird75_d_cu_ics__4.0.4__ALPS.ICS.MP.V2.16

SMDK4210__samsung__GT-S7562__bird75_d_cu_ics__4.0.4__ALPS.ICS.MP.V2.16

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 37 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A2D5FE8027
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D96B54C009DB105535EC27007D9
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : samsung
ProdName  : bird75_d_cu_ics
ProdModel : GT-S7562
Device    : bird75_d_cu_ics
AndroidVer: 4.0.4
MTKxCPU   : SMDK4210
MTKxPRJ   : ALPS.ICS.MP.V2.16

[Read Ok] : preloader_bird75_d_cu_ics.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6575 / V1.0.0 / bird75_d_cu_ics / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 428 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\SMDK4210__samsung__GT-S7562__bird75_d_cu_ics__4.0.4__ALPS.ICS.MP.V2.16\

All done!

Done!
Elapsed: 00:02:58
Reconnect Power/Cable!

MT6572_alpsG9200__prtech72_we_72_kk_4.4.2_5.0.2 ALPS.KK1.MP6.V1

MT6572_alpsG9200__prtech72_we_72_kk_4.4.2_5.0.2 ALPS.KK1.MP6.V1

preloader_rtech72_we_72_kk.bin

MT6580__8__T738__T738__5.1__ALPS.L1.MP6.V2.19_TX6580.WE.XZ.L

MT6580__8__T738__T738__5.1__ALPS.L1.MP6.V2.19_TX6580.WE.XZ.L

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : 8
Device Model   : T738
Device CPU     : MT6580
Device IntName : T738
Device Version : 5.1
Device Compile : 31/03/2017 03:17:15
Device Project : ALPS.L1.MP6.V2.19_TX6580.WE.XZ.L
Device ExtInfo : T738

MT6580__X6__X6__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P35 sony xperia

MT6580__X6__X6__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P35 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420291F0331224387
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420291F0331224387
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D96D9092E787C633E21444DC5DE
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : X6
ProdName  : X6
ProdModel : X6
Device    : magc6580_we_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_MAGC6580.WE.L_P35

[Read Ok] : preloader_magc6580_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_we_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1392 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__X6__X6__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P35\

All done!

Done!
Elapsed: 00.07.30
Reconnect Power/Cable!

 

MT6580__WE__WE_L3__t223_wh_WHL3__6.0__alps-mp-m0.mp1-V2.39_along6580.we.m_P19

MT6580__WE__WE_L3__t223_wh_WHL3__6.0__alps-mp-m0.mp1-V2.39_along6580.we.m_P19

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 880103455042313030287C5E07412367
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , 001BP
[eMMC] : FLASH_CID : 880103455042313030287C5E07412367
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D96A4B540BE20D9A081483004BD
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : WE
ProdName  : WE L3
ProdModel : WE L3
Device    : t223_wh_WHL3
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.39_along6580.we.m_P19

[Read Ok] : preloader_t223_wh_whl3.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / t223_wh_whl3 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1614 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\New folder\MT6580__WE__WE_L3__t223_wh_WHL3__6.0__alps-mp-m0.mp1-V2.39_along6580.we.m_P19\

All done!

Done!
Elapsed: 00:12:11
Reconnect Power/Cable!

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Xiaomi
Device Model   : hermes
Device CPU     : MT6795
Device IntName : hermes
Device Version : 5.0.2
Device Compile : 10/21/2015 8:27:03 AM
Device Project : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129
Device ExtInfo : Redmi Note 2

MT6795_Xiaomi_Redmi_Note_2_hermes_5.0.2_ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P120

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P120

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Xiaomi
Device Model   : hermes
Device CPU     : MT6795
Device IntName : hermes
Device Version : 5.0.2
Device Compile : 9/24/2015 9:03:47 PM
Device Project : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P120
Device ExtInfo : Redmi Note 2

MSM8974AC_Xiaomi_MI4W_cancro_4.4.2_ALPS.JB5.MP.V1.13_wo_ru Clone MT6582

MSM8974AC_Xiaomi_MI4W_cancro_4.4.2_ALPS.JB5.MP.V1.13_wo_ru

preloader_msm8974_h69_wcdma_wet_e.bin

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : xiaomi
Device Manufact.: Xiaomi
Device Model    : mido
Device CPU      : MSM8953
Device IntName  : mido
Device Version  : 6.0.1
CU_SWVer        : Xiaomi
Device Compile  : 2/16/2017 12:24:53 PM
Device ExtInfo  : Redmi Note 4

MSM8953__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4__markw__markw

MSM8953__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4__markw__markw

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : markw
Device CPU      : MSM8953
Device IntName  : markw
Device Version  : 6.0.1
CU_SWVer        : Xiaomi
Device Compile  : 18.09.2016 9:49:02
Device ExtInfo  : Redmi 4

MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3__kenzo__kenzo

MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3__kenzo__kenzo

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : kenzo
Device CPU      : MSM8952
Device IntName  : kenzo
Device Version  : 6.0.1
CU_SWVer        : Xiaomi
Device Compile  : 22-01-2017 11:59:30
Device ExtInfo  : Redmi Note 3

MSM8952__Xiaomi__Xiaomi__ANDR_v5.1.1__Redmi_Note_3__kenzo__kenzo

MSM8952__Xiaomi__Xiaomi__ANDR_v5.1.1__Redmi_Note_3__kenzo__kenzo

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : kenzo
Device CPU      : MSM8952
Device IntName  : kenzo
Device Version  : 5.1.1
CU_SWVer        : Xiaomi
Device Compile  : 10/25/2016 11:12:10 AM
Device ExtInfo  : Redmi Note 3

MSM8916__Xiaomi__Xiaomi__ANDR_v5.1.1__wt88047__wt88047__wt88047

MSM8916__Xiaomi__Xiaomi__ANDR_v5.1.1__wt88047__wt88047__wt88047

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : wt88047
Device CPU      : MSM8916
Device IntName  : wt88047
Device Version  : 5.1.1
CU_SWVer        : Xiaomi
Device Compile  : 2/15/2017 1:59:02 AM
Device ExtInfo  : wt88047