Monday, May 28, 2018

WW839_7731C_M_DOLPHIN_V4_6.0_WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350_DOLPHIN_V4

WW839_7731C_M_DOLPHIN_V4_6.0_WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350_DOLPHIN_V4

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : DOLPHIN_V4
Model Brand : WINMAX
Model Device: DOLPHIN_V4
AndrVersion : 6.0
BaseBand CPU: WW839_7731C_M
Project Ver : WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350
Model Ext   : DOLPHIN_V4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2037 MiB
Saved to : E:\CM2 Backup\WW839_7731C_M_DOLPHIN_V4_6.0_WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350_DOLPHIN_V4\
Done!

Elapsed: 00:06:56

Reconnect Power/Cable!
https://mega.nz/#!CzoTEZyL!DLB2lf8Sc6O7PkdinLbf2nZMCTz7kQOm8IZHZBqSO2A

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6+_S002_15052017_Primo_EF6+

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6+_S002_15052017_Primo_EF6+

- > Wait phone connected ...

Phone found! [ 22 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PRODUCT_WALTON_NAME
Model Brand : WALTON
Model Device: PRODUCT_WALTON_DEVICE
AndrVersion : 6.0
BaseBand CPU: WALTON
Project Ver : Primo_EF6+_S002_15052017
Model Ext   : Primo EF6+

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2530 MiB
Saved to : C:\Users\SKYNET\Desktop\WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6+_S002_15052017_Primo_EF6+\
Done!

Elapsed: 00:07:49

Reconnect Power/Cable!
https://mega.nz/#!myZkECpQ!Id6_VjBilaOU62QnmesYqAv_l3EOryZigeBeXxYOLkU

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6_S004_12052017_Primo_EF6

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6_S004_12052017_Primo_EF6

- > Wait phone connected ...

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PRODUCT_WALTON_NAME
Model Brand : WALTON
Model Device: PRODUCT_WALTON_DEVICE
AndrVersion : 6.0
BaseBand CPU: WALTON
Project Ver : Primo_EF6_S004_12052017
Model Ext   : Primo EF6

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2524 MiB
Saved to : C:\Users\SKYNET\Desktop\WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6_S004_12052017_Primo_EF6\
Done!

Elapsed: 00:07:31

Reconnect Power/Cable!
https://mega.nz/#!63AVGQzL!lcA1_j_hWuzVC3w1Oti8GA4zWY5YsegeP8d3ELbhd18


SP7731CEB_A11_itel_A11_6.0_A11-W407A-6.0-OP-V023-20170505_itel_A11

SP7731CEB_A11_itel_A11_6.0_A11-W407A-6.0-OP-V023-20170505_itel_A11

Loading    : SP7731CEB_A11_itel_A11_6.0_A11-W407A-6.0-OP-V023-20170505_itel_A11.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SC7731_eMMC_A11_ITEL_A11_6.0_INFINITY-BOX
FastCheck  : 0x008E966902

Loading files ...

File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731C_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
File : logo_480x800.bin
File : fblogo_480x800.bin
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : sysinfo.img
File : userdata.img
File : u-boot.bin
File : Infinity_SC77xx.xml

Load Ok!
https://mega.nz/#!migznBxa!TvAuiFCH-Ln_dP8lu3b06g5gPghKF-Of6ydI4B7QkVg

Kimfly M4 Stock Firmware ROM

Kimfly M4 Stock Firmware ROM

S16_A_BP235_LX_V1.3_20170429

https://mega.nz/#!zr4DEBaD!fmYY_gHTbotUAjgfJ4sy7N70PenRDehG5Anl-n2cys0

 

OT 9001X 2xALIE1 Original QFIL ROM

OT 9001X 2xALIE1 Original QFIL ROM

https://mega.nz/#!TqA1kJwY!53hKTmsaUVwG7jQ0RxWalInRIW6jnTWYzW3NH07fkMs

OT 9001D 2xALRS1 D37 Original QFIL ROM

OT 9001D 2xALRS1 D37 Original QFIL ROM

https://mega.nz/#!73h3ADzC!2NUcSOfipGMF9vpV1izBxShCcqjtKpkbX90qSaCIw-A

MT6752__htc__HTC_Desire_820s_dual_sim__htc_a50ml_dtul__4.4.4__ALPS.KK2.MP13.V1.1

MT6752__htc__HTC_Desire_820s_dual_sim__htc_a50ml_dtul__4.4.4__ALPS.KK2.MP13.V1.1

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 35 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6752
BB_CPU_NME : [MediaTek] MT6732|MT6752_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8F
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265050302F4938EC115
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265050302F4938EC115
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xA0E63D965FC89AEB9AAA95B127BCB550
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : htc
ProdName  : a50ml_dtul_htc_asia_wwe
ProdModel : HTC Desire 820s dual sim
Device    : htc_a50ml_dtul
AndroidVer: 4.4.4
MTKxCPU   : MT6752
MTKxPRJ   : ALPS.KK2.MP13.V1.1

[Read Ok] : preloader_lcsh6752_lwt_kk.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : cota.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6752 / V1.1.2 / lcsh6752_lwt_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1532 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2\MT6752__htc__HTC_Desire_820s_dual_sim__htc_a50ml_dtul__4.4.4__ALPS.KK2.MP13.V1.1\

All done!

Done!
Elapsed: 00:05:22
Reconnect Power/Cable!
https://mega.nz/#!L7oRQShA!_taavUh8TuUB358K0RLZpiKonxVN-B7wIE7oc9crdYI

INFINIX X551 Flash File

 MT6592_INFINIX-X551_Android5.1_X551-G808-A1-L-20151120_20170825_200358
 Action : Read Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM29 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6592
 CPU_SW: 0000
 CPU_HW: CA00
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 150100463832324D42
 CHIP     : MT65920000
 CPU ID   :
 EMMC ID  : 150100463832324D42
 EMMC Size: 16GB,  usable capacity: 14.57GB
 EMMC Name: eMMC_Samsung_F822MB
 Read Hardware Information is done.

 Reading Project Property ...
 done.
 Making dir: C:\Users\SERVER02\Desktop\Download\MT6592_INFINIX-X551_Android5.1_X551-G808-A1-L-20151120_20170825_200358\...[ok]
 Reading preloader ......ok
 Reading mbr ......ok
 Reading ebr1 ......ok
 Reading nvram ......ok
 Reading uboot ......ok
 Reading bootimg ......ok
 Reading recovery ......ok
 Reading sec_ro ......ok
 Reading logo ......ok
 Reading ebr2 ......ok
 Reading android ......ok
 Reading cache ......ok
 Reading usrdata ......ok
 All done.
 Files saved to: C:\Users\SERVER02\Desktop\Download\MT6592_INFINIX-X551_Android5.1_X551-G808-A1-L-20151120_20170825_200358\

 Action completed
 Time taken : 00:08:25
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
https://mega.nz/#!6joxWIyD!VjR86chH2OUz2lScWW9LsfOYjUZ_8Ij7bCsM2BN0cSU

MT6589__Huawei__Huawei_P9__HuaweiP9__4.1.2__ALPS.JB.SP.V1

MT6589__Huawei__Huawei_P9__HuaweiP9__4.1.2__ALPS.JB.SP.V1

Reading Flash Content now ...

Brand     : Huawei
ProdName  : HuaweiP9
ProdModel : Huawei P9
Device    : HuaweiP9
AndroidVer: 4.1.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB.SP.V1

[Read Ok] : preloader_yulong89_cu_jb.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / yulong89_cu_jb / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 726 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\MT6589__Huawei__Huawei_P9__HuaweiP9__4.1.2__ALPS.JB.SP.V1\

All done!
https://mega.nz/#!avojwbYS!7fMCC57J8HrL087LYQ4-NkN9N2GnLJui9XA0Ze2uApg

MT6582__T7Pro__T7_Pro__reallytek82_tb_kk__4.4.2__T7Pro_1_CM1_V01.5_01

MT6582__T7Pro__T7_Pro__reallytek82_tb_kk__4.4.2__T7Pro_1_CM1_V01.5_01

Reading Flash Content now ...

Brand     : T7Pro
ProdName  : reallytek82_tb_kk
ProdModel : T7 Pro
Device    : reallytek82_tb_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   :
T7Pro_1_CM1_V01.5_01
[Read Ok] : preloader_reallytek82_tb_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / reallytek82_tb_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1466 MiB
https://mega.nz/#!v7IlnLQL!kvEiDUkDKUjhWCvfAxrUN0vKrNlTvAtT7m_PjC6ryzg
 

MT6582__iPhone__6s_plus__iPhone__4.4.2__ALPS.KK1.MP1.V2.10

MT6582__iPhone__6s_plus__iPhone__4.4.2__ALPS.KK1.MP1.V2.10

Reading Flash Content now ...

Brand     : iPhone
ProdName  : iPhone
ProdModel : 6s plus
Device    : iPhone
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_hsimobile82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hsimobile82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1264 MiB
Scatter saved to : C:\Users\MT6582__iPhone__6s_plus__iPhone__4.4.2__ALPS.KK1.MP1.V2.10\

All done!
https://mega.nz/#!vqggxIaS!hNCqEQTji2KhAcBluS7y1bs8_nFgiCqKDibZlu1ZufA

MT6582__GIONEE__P3__P3__4.4.2__ALPS.KK1.MP1.V2.10

MT6582__GIONEE__P3__P3__4.4.2__ALPS.KK1.MP1.V2.10

Reading Flash Content now ...
USBDL : Init HSUSB Ok!

Brand     : GIONEE
ProdName  : GIONEE
ProdModel : P3
Device    : P3
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_gionee82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : spdata.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / gionee82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1202 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\Firmware\MT6582__GIONEE__P3__P3__4.4.2__ALPS.KK1.MP1.V2.10\
https://mega.nz/#!urJhzSBb!kIdN8QzAsJc-L-mUgZo9DAFsn82egxnyv6W7N1Mym68

MT6580__Winstar__WS112__WS112__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

MT6580__Winstar__WS112__WS112__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Winstar
ProdName  : B36E4
ProdModel : WS112
Device    : WS112
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

[Read Ok] : preloader_b36e841b15.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b36e841b15 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2045 MiB
Scatter saved to : G:\MT6580__Winstar__WS112__WS112__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\

All done!

https://mega.nz/#!7vojXaAI!Oe1cR60dABRweMXrwP1WF54DfurMgPnwO3iK2KZ5CFI

 

MT6580__WINMAX__TIGER_X5__TIGER_X5__6.0__alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P17

MT6580__WINMAX__TIGER_X5__TIGER_X5__6.0__alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P17

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : WINMAX
ProdName  : TIGER_X5
ProdModel : TIGER X5
Device    : TIGER_X5
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P17

[Read Ok] : preloader_keytak6580_weg_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1970 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\Firmware\MT6580__WINMAX__TIGER_X5__TIGER_X5__6.0__alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P17\

All done!
https://mega.nz/#!zuIAmQhJ!4atI3Q_WYASUspbGyGgLZAW6t7nWW89hr1SwyzCHHRY

MT6580__Symphony__V90__V90__6.0__V90_HW1_V4

MT6580__Symphony__V90__V90__6.0__V90_HW1_V4

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : V90
ProdModel : V90
Device    : V90
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : V90_HW1_V4

[Read Ok] : preloader_sr6580_weg_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / sr6580_weg_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2298 MiB
Scatter saved to : C:\Users\SKYNET\MT6580__Symphony__V90__V90__6.0__V90_HW1_V4\

All done!

Done!
Elapsed: 00:07:50
Reconnect Power/Cable!
https://mega.nz/#!jzoDXSYS!KzvBJW0ZJgSUVirudQ7Y3D83G_tV6deVvJ7B_EAz-OY


MT6580__RX1__RX-1__RX1__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

MT6580__RX1__RX-1__RX1__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

Brand     : RX1
ProdName  : A5
ProdModel : RX-1
Device    : RX1
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

[Read Ok] : preloader_b36e541b15.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b36e541b15 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2045 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\rx-1\MT6580__RX1__RX-1__RX1__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\

All done!
https://mega.nz/#!X3ZVCCgC!kWPyaK8VgoY94_UIbxAaoy_otLLZlJqpSdyTaZPdp6c


MT6580__PANCO__C20__C20__6.0__alps-mp-m0.mp1-V2.34_long6580.we.m_P6

MT6580__PANCO__C20__C20__6.0__alps-mp-m0.mp1-V2.34_long6580.we.m_P6

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : PANCO
ProdName  : C20
ProdModel : C20
Device    : C20
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_long6580.we.m_P6

[Read Ok] : preloader_long6580_we_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / long6580_we_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1700 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\MT6580__PANCO__C20__C20__6.0__alps-mp-m0.mp1-V2.34_long6580.we.m_P6\

All done!
https://mega.nz/#!bvwwgLTT!sGFquNid6KXeqIWp5vzzTZ4-leAe95kWJ75-q35r-Mo

MT6580__BS400__BS400__BS400__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

MT6580__BS400__BS400__BS400__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29


Wait for phone...
Phone found! [ 42 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B4A5330304D03D217287F4007
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 1501004B4A5330304D03D217287F4007
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xB4212F0F0DC4E7751A728319949B28B6
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ... 
xGPT : Normalize settings Ok!
Brand     : BS400
ProdName  : BS400
ProdModel : BS400
Device    : BS400
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29
[Read Ok] : preloader_b36a_j4_1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / b36a_j4_1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1848 MiB
Scatter saved to : C:\Users\SKYNET\Desktop\MT6580__BS400__BS400__BS400__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\
All done!
https://mega.nz/#!2vYVjTLY!xGpJq8j8vd6K8sg6gyXkVVXpn20E5BrVaUFnzMzbNBY
 

MT6580__alps__S-25__S-25__6.0__alps-mp-m0.mp1-V2.39_magc6580.we.c.m_P21

MT6580__alps__S-25__S-25__6.0__alps-mp-m0.mp1-V2.39_magc6580.we.c.m_P21

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100385750443352006A3346CD9313
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3DPW
[eMMC] : FLASH_CID : 150100385750443352006A3346CD9313
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D961CA9B714631A06ED062C98FF
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : S-25
ProdModel : S-25
Device    : S-25
AndroidVer: 6.0
CU_SWVer  : V1.0.5
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.39_magc6580.we.c.m_P21

[Read Ok] : preloader_magc6580_we_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_we_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1911 MiB
Scatter saved to : D:\MT6580__alps__S-25__S-25__6.0__alps-mp-m0.mp1-V2.39_magc6580.we.c.m_P21\

All done!

Done!
Elapsed: 00:09:42
Reconnect Power/Cable!
https://mega.nz/#!ruQ11Apb!1DMuTbv2mohAm2EXDcDQRzTvbdFzZ-RyDMc3unT28lM

Lenovo S668 S062 V2 150604 Flash File

Lenovo S668 S062 V2 150604 Flash File
https://mega.nz/#!qyITVIIZ!6bAdqcyqUZ2VEbFdPH7sx2f6-m7_6p1GSa3re8S9rto

Kimfly M9 Flash File

Kimfly M9 Flash File
https://mega.nz/#!GqIxXAJL!Hej2qzUZ2VUKN44Mrcg2ELcIehqDp9PJNuPHA56EeUY

MT6572__HUAWEI__HUAWEI_Y600-U20__HWY600-U__4.2.2__Y600-U20V100R001C435B012

MT6572__HUAWEI__HUAWEI_Y600-U20__HWY600-U__4.2.2__Y600-U20V100R001C435B012

Reading Flash Content now ...

Brand     : HUAWEI
ProdName  : Y600-U20
ProdModel : HUAWEI Y600-U20
Device    : HWY600-U
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : Y600-U20V100R001C435B012

[Read Ok] : preloader_huaqin72_we_b2b_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / huaqin72_we_b2b_jb3 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 679 MiB
Scatter saved to : C:\Users\skynet\MT6572__HUAWEI__HUAWEI_Y600-U20__HWY600-U__4.2.2__Y600-U20V100R001C435B012\

All done!
https://mega.nz/#!bnJBiAiS!iZLHATgKxQy0z5SLhUOMcVIsPDHF8SrNbdRI7YUP0ig
Free

ads