MT6572__Western__Jara-D1__Jara-D1__4.4.2__Western_Jara_D1_Z137IPS_S135MWF1_DX07_V0.6.1224

MT6572__Western__Jara-D1__Jara-D1__4.4.2__Western_Jara_D1_Z137IPS_S135MWF1_DX07_V0.6.1224

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Western
Device Model   : Jara-D1
Device CPU     : MT6572
Device IntName : Jara-D1
Device Version : 4.4.2
Device Compile : 7/3/2015 2:11:19 AM
Device Project : Western_Jara_D1_Z137IPS_S135MWF1_DX07_V0.6.1224
Device ExtInfo : Jara-D1

MT6572__V10__V10__V10__5.1.1__ALPS.KK1.MP7.V1

MT6572__V10__V10__V10__5.1.1__ALPS.KK1.MP7.V1

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 37 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111014298E9EAC25B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111014298E9EAC25B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D96CD8F4696CC02346F6DFC0BA9
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : V10
ProdName  : V10
ProdModel : V10
Device    : V10
AndroidVer: 5.1.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_yuanda72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 671 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6572__V10__V10__V10__5.1.1__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:04:04
Reconnect Power/Cable!

MT6572__TCL__4013D__Pixi3-4__4.4.2__ALPS.KK1.MP6.V1

MT6572__TCL__4013D__Pixi3-4__4.4.2__ALPS.KK1.MP6.V1

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 37 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A32354142028A27D2F3A291
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BA52J
[eMMC] : FLASH_CID : 150100464A32354142028A27D2F3A291
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D96D07EDCD4982F16CF3209642F
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : TCL
ProdName  : 4013D
ProdModel : 4013D
Device    : Pixi3-4
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_pixi3_4.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / pixi3_4 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1243 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6572__TCL__4013D__Pixi3-4__4.4.2__ALPS.KK1.MP6.V1\

All done!

Done!
Elapsed: 00:07:23
Reconnect Power/Cable!

MT6572__SMILE__Z2__SMILE__4.4.2__ALPS.KK1.MP7.V1

MT6572__SMILE__Z2__SMILE__4.4.2__ALPS.KK1.MP7.V1

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110159DAC4A02377
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110159DAC4A02377
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D965410BF2D27278B923439E70C
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
USBDL : Init HSUSB Ok!

Brand     : SMILE
ProdName  : Z2
ProdModel : Z2
Device    : SMILE
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_yuanda72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 571 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6572__SMILE__Z2__SMILE__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00.04.27
Reconnect Power/Cable!

MT6572__iris505__iris505__iris505__4.4.2__ALPS.KK1.MP7.V1

MT6572__iris505__iris505__iris505__4.4.2__ALPS.KK1.MP7.V1

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111014BE12D8514B1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111014BE12D8514B1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D961C20123186438DC85CE27034
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : iris505
ProdName  : iris505
ProdModel : iris505
Device    : iris505
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_lava72_sp49t.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / lava72_sp49t / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 805 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6572__iris505__iris505__iris505__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00.05.03
Reconnect Power/Cable!

MT6572__alps__Z-22__d37f2__6.0__D37F2_YBZ_Z_22_5STAR_EMMC4_32_M20_20170412_2006

MT6572__alps__Z-22__d37f2__6.0__D37F2_YBZ_Z_22_5STAR_EMMC4_32_M20_20170412_2006

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 37 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D42014618D0F1B021
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D42014618D0F1B021
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D969A3482F715313758E23B79E8
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : Z-22
ProdModel : Z-22
Device    : d37f2
AndroidVer: 6.0
MTKxCPU   : MT6572
MTKxPRJ   : D37F2_YBZ_Z_22_5STAR_EMMC4_32_M20_20170412_2006

[Read Ok] : preloader_d37f2.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / d37f2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 778 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\CM2 Read\MT6572__alps__Z-22__d37f2__6.0__D37F2_YBZ_Z_22_5STAR_EMMC4_32_M20_20170412_2006\

All done!

Done!
Elapsed: 00:05:06
Reconnect Power/Cable!

MT6572__alps__SM-G9200__SM-G9200__4.2.2__ALPS.JB3.MP.V1.2

MT6572__alps__SM-G9200__SM-G9200__4.2.2__ALPS.JB3.MP.V1.2

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : alps
Device Model   : SM-G9200
Device CPU     : MT6572
Device IntName : SM-G9200
Device Version : 4.2.2
Device Compile : 30/04/2015 10:26:36
Device Project : ALPS.JB3.MP.V1.2
Device ExtInfo : SM-G9200

MT6572__alps__bestone72_cwet_kk__bestone72_cwet_kk__4.4.2__ALPS.KK1.MP7.V1

MT6572__alps__bestone72_cwet_kk__bestone72_cwet_kk__4.4.2__ALPS.KK1.MP7.V1

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : alps
Device Model   : bestone72_cwet_kk
Device CPU     : MT6572
Device IntName : bestone72_cwet_kk
Device Version : 4.4.2
Device Compile : 06/05/2016 10:46:15
Device Project : ALPS.KK1.MP7.V1
Device ExtInfo : bestone72_cwet_kk

J710GN Stock Rom

J710GNDXU1APG1_J710GNOLB1APG1

J710GNDXU1APG1_J710GNOLB1APG1_J710GNDXU1APG1_HOME.tar.md5

MT6582__HUAWEI__HUAWEI_LUA-U22__HWLUA-U6582__5.1__LUA-U22C567B004

MT6582__HUAWEI__HUAWEI_LUA-U22__HWLUA-U6582__5.1__LUA-U22C567B004

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : HUAWEI
Device Model   : HWLUA-U6582
Device CPU     : MT6582
Device IntName : LUA-U22
Device Version : 5.1
Device Compile : 4/21/2016 3:08:13 PM
Device Project : LUA-U22C567B004
Device ExtInfo : HUAWEI LUA-U22

MT6582__HUAWEI__HUAWEI_LUA-U22__HWLUA-U6582__5.1__LUA-U22C328B0051

MT6582__HUAWEI__HUAWEI_LUA-U22__HWLUA-U6582__5.1__LUA-U22C328B0051

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : HUAWEI
Device Model   : HWLUA-U6582
Device CPU     : MT6582
Device IntName : LUA-U22
Device Version : 5.1
Device Compile : 5/1/2016 6:28:06 AM
Device Project : LUA-U22C328B005
Device ExtInfo : HUAWEI LUA-U22

MT6572__HUAWEI__HUAWEI_Y600-U20__HWY600-U__4.2.2__Y600-U20V100R001C576B107

MT6572__HUAWEI__HUAWEI_Y600-U20__HWY600-U__4.2.2__Y600-U20V100R001C576B107

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : HUAWEI
Device Model   : HWY600-U
Device CPU     : MT6572
Device IntName : Y600-U20
Device Version : 4.2.2
Device Compile : 7/27/2015 6:27:07 AM
Device Project : Y600-U20V100R001C576B107
Device ExtInfo : HUAWEI Y600-U20

MT6572__HUAWEI__HUAWEI_Y600-U20__HWY600-U__4.2.2__Y600-U20V100R001C548B003

MT6572__HUAWEI__HUAWEI_Y600-U20__HWY600-U__4.2.2__Y600-U20V100R001C548B003

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : HUAWEI
Device Model   : HWY600-U
Device CPU     : MT6572
Device IntName : Y600-U20
Device Version : 4.2.2
Device Compile : 5/23/2014 5:55:39 AM
Device Project : Y600-U20V100R001C548B003
Device ExtInfo : HUAWEI Y600-U20

HUAWEI Y3II Firmware (LUA-U22, C567B010, Southern-East Asia)

HUAWEI Y3II Firmware (LUA-U22, C567B010, Southern-East Asia)

Huawei Y3II LUA-U22C567B004

GXYGEA_NU10_6.0_X5_MT6580_B15_EMMC_64_4_QHD_ADKS_L10_3_nuu_20161107.094550_NU10

GXYGEA_NU10_6.0_X5_MT6580_B15_EMMC_64_4_QHD_ADKS_L10_3_nuu_20161107.094550_NU10

Set mode to : SP [SC773x] eMMC [Generic]

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : NU10
Model Brand : NU10
Model Device: NU10
AndrVersion : 6.0
BaseBand CPU: GXYGEA
Project Ver : X5_MT6580_B15_EMMC_64_4_QHD_ADKS_L10_3_nuu 20161107.094550
Model Ext   : NU10

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.12.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1782 MiB
Saved to : C:\Users\SKYNET02\Desktop\CM2\GXYGEA_NU10_6.0_X5_MT6580_B15_EMMC_64_4_QHD_ADKS_L10_3_nuu_20161107.094550_NU10\
Done!

Elapsed: 00.07.35

Reconnect Power/Cable!

MT6580__WE__WE_E1__t53_w509__5.1__ALPS.L1.MP6.V2_ALONG6580.WE.L_P18

MT6580__WE__WE_E1__t53_w509__5.1__ALPS.L1.MP6.V2_ALONG6580.WE.L_P18

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 88010345504131303043490D61039319
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , 001AP
[eMMC] : FLASH_CID : 88010345504131303043490D61039319
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xA0E63D965175C9BA76982FE03D18BFC9
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : WE
ProdName  : full_t53_wh_w509
ProdModel : WE E1
Device    : t53_w509
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_ALONG6580.WE.L_P18

[Read Ok] : preloader_t53_wh_w509.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / t53_wh_w509 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1255 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__WE__WE_E1__t53_w509__5.1__ALPS.L1.MP6.V2_ALONG6580.WE.L_P18\

All done!

Done!
Elapsed: 00.09.00
Reconnect Power/Cable!

MT6572__alps__A2__d37b1__4.4.2__D37B1_DF_A2_EMMC4_32_B1B5_WE_M01_20170225_1242

MT6572__alps__A2__d37b1__4.4.2__D37B1_DF_A2_EMMC4_32_B1B5_WE_M01_20170225_1242

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D43303447581E40EC0D9173
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447581E40EC0D9173
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D9668AB34D6C41995F3F8820D37
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
USBDL : Init HSUSB Ok!

Brand     : alps
ProdName  : A2
ProdModel : A2
Device    : d37b1
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : D37B1_DF_A2_EMMC4_32_B1B5_WE_M01_20170225_1242

[Read Ok] : preloader_d37b1.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / d37b1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 620 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6572__alps__A2__d37b1__4.4.2__D37B1_DF_A2_EMMC4_32_B1B5_WE_M01_20170225_1242\

All done!

Done!
Elapsed: 00.04.33
Reconnect Power/Cable!

C385_SMA_241_c385_sma_241_7.0_NRD90M_release-keys_WE_L6

C385_SMA_241_c385_sma_241_7.0_NRD90M_release-keys_WE_L6

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : c385_sma_241
Model Brand : SPRD
Model Device: c385_sma_241
AndrVersion : 7.0
BaseBand CPU: C385_SMA_241
Project Ver : NRD90M release-keys
Model Ext   : WE L6

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.13.6_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2332 MiB
Saved to : C:\Users\SKYNET02\Desktop\CM2\C385_SMA_241_c385_sma_241_7.0_NRD90M_release-keys_WE_L6\
Done!

Elapsed: 00.11.20

Reconnect Power/Cable!