MT6582__QUMO__QUMO Quest474__ratech82_wet_rlk_jb5__4.2.2__G820_D1_QUMO_V0.2_20140819

MT6582__QUMO__QUMO Quest474__ratech82_wet_rlk_jb5__4.2.2__G820_D1_QUMO_V0.2_20140819

 

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D4330344758FEC164C17143
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344758FEC164C17143
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : QUMO
ProdName  : ratech82_wet_rlk_jb5
ProdModel : QUMO Quest474
Device    : ratech82_wet_rlk_jb5
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : G820_D1_QUMO_V0.2_20140819

[Read Ok] : preloader_ratech82_wet_rlk_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / ratech82_wet_rlk_jb5 / EMMC
FW Size : 679 MiB
Scatter saved to : \MT6582__QUMO__QUMO Quest474__ratech82_wet_rlk_jb5__4.2.2__G820_D1_QUMO_V0.2_20140819\

All done!

Done!
Elapsed: 00:03:28
Reconnect Power/Cable!