MT6582_ACER_Z500_z500_emea_gen1_acer_Z500_ALPS.KK1.MP1.V2.16_Android_4.4.2_20141010_144724

MT6582_ACER_Z500_z500_emea_gen1_acer_Z500_ALPS.KK1.MP1.V2.16_Android_4.4.2_20141010_144724

Operation : Check / Read Info [ v1.38 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 59 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D4330344758FA217E157101
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344758FA217E157101
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : acer
ProdName  : z500_emea_gen1
ProdModel : Z500
Device    : acer_Z500
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

MODEM :
BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V39_P2_1_wg_n

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!