MSM8916__OPPO__OPPO__ANDR_v5.1.1__MSM8916_for_arm64__msm8916_64__msm8916_64__A53_11.A.11_011_201606271852

MSM8916__OPPO__OPPO__ANDR_v5.1.1__MSM8916_for_arm64__msm8916_64__msm8916_64__A53_11.A.11_011_201606271852

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 061668F3
ID_BLOCK_L : F0706A9443AFD4D7B0E56F70BF8A0A42
ID_BLOCK_L : CD800EA1923DAD26DB1A7FB4BE716F6C
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand     : OPPO
ProdName  : msm8916_64
ProdModel : MSM8916 for arm64
Device    : msm8916_64
AndroidVer: 5.1.1
SWVersion : A53_11.A.11_011_201606271852
Manufact. : OPPO
QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__MSM8916_for_arm64__msm8916_64__msm8916_64__A53_11.A.11_011_201606271852

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : driver.iso
[Read Ok] : reserve4.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : cdt.mbn
[Read Ok] : gpt_backup2.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 2320 MiB

Done!
Elapsed: 00:03:26

Oppo A53 Flash File

MSM8916__OPPO__OPPO__ANDR_v5.1.1__MSM8916_for_arm64__msm8916_64__msm8916_64__A53_11.A.11_011_201606271852

 1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 061668F3
ID_BLOCK_L : F0706A9443AFD4D7B0E56F70BF8A0A42
ID_BLOCK_L : CD800EA1923DAD26DB1A7FB4BE716F6C
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand     : OPPO
ProdName  : msm8916_64
ProdModel : MSM8916 for arm64
Device    : msm8916_64
AndroidVer: 5.1.1
SWVersion : A53_11.A.11_011_201606271852
Manufact. : OPPO
QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__MSM8916_for_arm64__msm8916_64__msm8916_64__A53_11.A.11_011_201606271852

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : driver.iso
[Read Ok] : reserve4.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : cdt.mbn
[Read Ok] : gpt_backup2.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 2320 MiB

Done!
Elapsed: 00:03:26

WW839_7731C_M_DOLPHIN_V4_6.0_WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350_DOLPHIN_V4

WW839_7731C_M_DOLPHIN_V4_6.0_WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350_DOLPHIN_V4

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : DOLPHIN_V4
Model Brand : WINMAX
Model Device: DOLPHIN_V4
AndrVersion : 6.0
BaseBand CPU: WW839_7731C_M
Project Ver : WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350
Model Ext   : DOLPHIN_V4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2037 MiB
Saved to : E:\CM2 Backup\WW839_7731C_M_DOLPHIN_V4_6.0_WINMAX_DOLPHIN_V4_H4007C_B1_32K_LESS_324_V07_20170803_1350_DOLPHIN_V4\
Done!

Elapsed: 00:06:56

Reconnect Power/Cable!

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6+_S002_15052017_Primo_EF6+

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6+_S002_15052017_Primo_EF6+

- > Wait phone connected ...

Phone found! [ 22 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PRODUCT_WALTON_NAME
Model Brand : WALTON
Model Device: PRODUCT_WALTON_DEVICE
AndrVersion : 6.0
BaseBand CPU: WALTON
Project Ver : Primo_EF6+_S002_15052017
Model Ext   : Primo EF6+

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2530 MiB
Saved to : C:\Users\SKYNET\Desktop\WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6+_S002_15052017_Primo_EF6+\
Done!

Elapsed: 00:07:49

Reconnect Power/Cable!

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6_S004_12052017_Primo_EF6

WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6_S004_12052017_Primo_EF6

- > Wait phone connected ...

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PRODUCT_WALTON_NAME
Model Brand : WALTON
Model Device: PRODUCT_WALTON_DEVICE
AndrVersion : 6.0
BaseBand CPU: WALTON
Project Ver : Primo_EF6_S004_12052017
Model Ext   : Primo EF6

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2524 MiB
Saved to : C:\Users\SKYNET\Desktop\WALTON_PRODUCT_WALTON_DEVICE_6.0_Primo_EF6_S004_12052017_Primo_EF6\
Done!

Elapsed: 00:07:31

Reconnect Power/Cable!

SP7731CEB_A11_itel_A11_6.0_A11-W407A-6.0-OP-V023-20170505_itel_A11

SP7731CEB_A11_itel_A11_6.0_A11-W407A-6.0-OP-V023-20170505_itel_A11

Loading    : SP7731CEB_A11_itel_A11_6.0_A11-W407A-6.0-OP-V023-20170505_itel_A11.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SC7731_eMMC_A11_ITEL_A11_6.0_INFINITY-BOX
FastCheck  : 0x008E966902

Loading files ...

File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731C_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
File : logo_480x800.bin
File : fblogo_480x800.bin
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : sysinfo.img
File : userdata.img
File : u-boot.bin
File : Infinity_SC77xx.xml

Load Ok!

Kimfly M4 Stock Firmware ROM

Kimfly M4 Stock Firmware ROM

S16_A_BP235_LX_V1.3_20170429