Xiaomi Redmi Note 3 Hard Brick Dead Boot Repair File

Xiaomi Redmi Note 3 Hard Brick Dead Boot Repair File

hennessy_images_V7.1.6.0.LHNCNCK_20160107.0000.12_5.0_cn_434e06a8a9 

MSM8996__Xiaomi__Xiaomi__ANDR_v7.0__Mi5__gemini__gemini

MSM8996__Xiaomi__Xiaomi__ANDR_v7.0__Mi5__gemini__gemini

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 5F3B893B
ID_BLOCK_I : 009470E1
ID_BLOCK_L : B1D4C67D9B7A2F3B773B4A94495C5E4C
ID_BLOCK_L : B1CD7A17D0678533B322CDA75E0FC1FC
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUBG4G1CE-B0B1 0800
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!


Brand     : Xiaomi
ProdName  : gemini
ProdModel : Mi5
Device    : gemini
AndroidVer: 7.0
Manufact. : Xiaomi
QLMxCPU   : MSM8996

DevInfo : MSM8996__Xiaomi__Xiaomi__ANDR_v7.0__Mi5__gemini__gemini

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : devcfg.mbn
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : lksecapp.mbn
[Read Ok] : pmic.bin
[Read Ok] : rpm.mbn
[Read Ok] : hyp.mbn
[Read Ok] : tz.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : btfm.mbn
[Read Ok] : fs_gc.img
[Read Ok] : lsplash.img
[Read Ok] : adspso.bin
[Read Ok] : splash.img
[Read Ok] : mdtp.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : gpt_backup5.bin

Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 3139 MiB

Done!
Elapsed: 00:03:58

Reconnect Power/Cable!

Redmi A1 8953

Redmi A1 8953

MT6797__Xiaomi__Redmi_Pro__omega__6.0__alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68

MT6797__Xiaomi__Redmi_Pro__omega__6.0__alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 57 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6797
BB_CPU_NME : [MediaTek] Helio[X20]|MT6797_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer   : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 03G46
[eMMC] : FLASH_CID : 1101003036344733300032D16EC353CD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000E8F800000
[eMMC] : FLASH_UCP : 59640 MiB [eMMC 128 GiB]
DEV RID    : 0xA0E63D96D8C755C42AC6F4626655328B
INT RAM    : 0x00000000
EXT RAM    : 0xC0000000 [3 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Xiaomi
ProdName  : omega
ProdModel : Redmi Pro
Device    : omega
AndroidVer: 6.0
MTKxCPU   : MT6797
MTKxPRJ   : alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68

[Read Ok] : preloader_lcsh6797_6c_lw_m.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : scp1.img
[Read Ok] : scp2.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6797 / V1.1.2 / lcsh6797_6c_lw_m / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2644 MiB
Scatter saved to : E:\MT6797__Xiaomi__Redmi_Pro__omega__6.0__alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68\

All done!

Done!
Elapsed: 00:02:22
Reconnect Power/Cable!

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...

Error : Fail to init protocol!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 7254A399
ID_BLOCK_I : 000460E1
ID_BLOCK_L : B5F2514DFFF63A7D1468F8AF23936B6C
ID_BLOCK_L : 1CD89231C4D7FF2F28B350532C9A463B
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Brand     : xiaomi
ProdName  : mido
ProdModel : Redmi Note 4
Device    : mido
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8953

DevInfo : MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8953 / eMMC
Firmware Size : 3671 MiB

Done!
Elapsed: 00:03:42

Reconnect Power/Cable!

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : xiaomi
Device Manufact.: Xiaomi
Device Model    : mido
Device CPU      : MSM8953
Device IntName  : mido
Device Version  : 6.0.1
CU_SWVer        : Xiaomi
Device Compile  : 4/28/2017 1:22:43 PM
Device ExtInfo  : Redmi Note 4

MSM8996__Xiaomi__Xiaomi__ANDR_v6.0.1__MI_5s__capricorn__capricorn

MSM8996__Xiaomi__Xiaomi__ANDR_v6.0.1__MI_5s__capricorn__capricorn

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...

Error : Fail to init protocol!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 821 [MSM8996 Pro]
ID_BLOCK_S : 867B6DEE
ID_BLOCK_I : 0005F0E1
ID_BLOCK_L : 026173CE2EC9E2E80476FD4184EF0DFF
ID_BLOCK_L : F18D3A579027C57373E28DE71E4F01BC
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : TOSHIBA THGLF2G9J8LBATRH0101
UFS SectSize : 0x1000
UFS LU0 Size : 0x00000007602F0000 : 29.50 GiB
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x198
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x801f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!


Brand     : Xiaomi
ProdName  : capricorn
ProdModel : MI 5s
Device    : capricorn
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8996

DevInfo : MSM8996__Xiaomi__Xiaomi__ANDR_v6.0.1__MI_5s__capricorn__capricorn

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : devcfg.mbn
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : recovery.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : pmic.bin
[Read Ok] : rpm.mbn
[Read Ok] : hyp.mbn
[Read Ok] : tz.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : btfm.mbn
[Read Ok] : fs_gc.img
[Read Ok] : lsplash.img
[Read Ok] : adspso.bin
[Read Ok] : splash.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : gpt_backup5.bin

Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 3885 MiB

Done!
Elapsed: 00:03:40

Reconnect Power/Cable!

MSM8916__Xiaomi__Xiaomi__ANDR_v4.4.4__2014811__HM2014811__2014811

MSM8916__Xiaomi__Xiaomi__ANDR_v4.4.4__2014811__HM2014811__2014811

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : HM2014811
Device CPU      : MSM8916
Device IntName  : 2014811
Device Version  : 4.4.4
CU_SWVer        : Xiaomi
Device Compile  : 4/19/2016 1:26:48 PM
Device ExtInfo  : 2014811

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Xiaomi
Device Model   : hermes
Device CPU     : MT6795
Device IntName : hermes
Device Version : 5.0.2
Device Compile : 10/21/2015 8:27:03 AM
Device Project : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129
Device ExtInfo : Redmi Note 2

MT6795_Xiaomi_Redmi_Note_2_hermes_5.0.2_ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P120

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P120

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Xiaomi
Device Model   : hermes
Device CPU     : MT6795
Device IntName : hermes
Device Version : 5.0.2
Device Compile : 9/24/2015 9:03:47 PM
Device Project : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P120
Device ExtInfo : Redmi Note 2

MSM8974AC_Xiaomi_MI4W_cancro_4.4.2_ALPS.JB5.MP.V1.13_wo_ru Clone MT6582

MSM8974AC_Xiaomi_MI4W_cancro_4.4.2_ALPS.JB5.MP.V1.13_wo_ru

preloader_msm8974_h69_wcdma_wet_e.bin

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4__mido__mido

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : xiaomi
Device Manufact.: Xiaomi
Device Model    : mido
Device CPU      : MSM8953
Device IntName  : mido
Device Version  : 6.0.1
CU_SWVer        : Xiaomi
Device Compile  : 2/16/2017 12:24:53 PM
Device ExtInfo  : Redmi Note 4

MSM8953__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4__markw__markw

MSM8953__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4__markw__markw

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : markw
Device CPU      : MSM8953
Device IntName  : markw
Device Version  : 6.0.1
CU_SWVer        : Xiaomi
Device Compile  : 18.09.2016 9:49:02
Device ExtInfo  : Redmi 4

MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3__kenzo__kenzo

MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3__kenzo__kenzo

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : kenzo
Device CPU      : MSM8952
Device IntName  : kenzo
Device Version  : 6.0.1
CU_SWVer        : Xiaomi
Device Compile  : 22-01-2017 11:59:30
Device ExtInfo  : Redmi Note 3

MSM8952__Xiaomi__Xiaomi__ANDR_v5.1.1__Redmi_Note_3__kenzo__kenzo

MSM8952__Xiaomi__Xiaomi__ANDR_v5.1.1__Redmi_Note_3__kenzo__kenzo

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : kenzo
Device CPU      : MSM8952
Device IntName  : kenzo
Device Version  : 5.1.1
CU_SWVer        : Xiaomi
Device Compile  : 10/25/2016 11:12:10 AM
Device ExtInfo  : Redmi Note 3

MSM8916__Xiaomi__Xiaomi__ANDR_v5.1.1__wt88047__wt88047__wt88047

MSM8916__Xiaomi__Xiaomi__ANDR_v5.1.1__wt88047__wt88047__wt88047

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : wt88047
Device CPU      : MSM8916
Device IntName  : wt88047
Device Version  : 5.1.1
CU_SWVer        : Xiaomi
Device Compile  : 2/15/2017 1:59:02 AM
Device ExtInfo  : wt88047

 

MT6580__NEO7__NEO7__NEO7__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

MT6580__NEO7__NEO7__NEO7__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110129FA05D9A2A7
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110129FA05D9A2A7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA0E63D96F2354AE1B28F49D0353C27BE
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : NEO7
ProdName  : NEO7
ProdModel : NEO7
Device    : NEO7
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 935 MiB
Scatter saved to : C:\Users\SKYNET02\Desktop\CM2\MT6580__NEO7__NEO7__NEO7__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!

Done!
Elapsed: 00.07.24
Reconnect Power/Cable!

MSM8974AC__Xiaomi__MI 4W__cancro__4.4.2__ALPS.JB5.MP.V1.13

MSM8974AC__Xiaomi__MI 4W__cancro__4.4.2__ALPS.JB5.MP.V1.13

preloader_msm8974_h69_wcdma_wet_e.bin

MT6795_Xiaomi_Redmi_Note_2_hermes_5.0.2_ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

MT6795_Xiaomi_Redmi_Note_2_hermes_5.0.2_ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Xiaomi
Device Model   : hermes
Device CPU     : MT6795
Device IntName : hermes
Device Version : 5.0.2
Device Compile : 10/21/2015 8:27:03 AM
Device Project : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129
Device ExtInfo : Redmi Note 2

MSM8937__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4A__rolex__rolex

MSM8937__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4A__rolex__rolex

Operation : Read Flash [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 0053F7FE
ID_BLOCK_I : 000560E1
ID_BLOCK_L : 1059CAE8545385D8F9F35D089C0E8EC1
ID_BLOCK_L : 1DDB9130C7D6F02E29B05154239B473A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!


Brand     : Xiaomi
ProdName  : rolex
ProdModel : Redmi 4A
Device    : rolex
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8937

DevInfo : MSM8937__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4A__rolex__rolex

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8917 / eMMC
Firmware Size : 2730 MiB

Done!
Elapsed: 00:08:13

Reconnect Power/Cable!