SP7731CEB_FS286_sp7731c_fs286_32v4_6.0_S40A2_LINNEX_20161228_LINNEX

SP7731CEB_FS286_sp7731c_fs286_32v4_6.0_S40A2_LINNEX_20161228_LINNEX

- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_fs286_32v4_project
Model Brand : LINNEX
Model Device: sp7731c_fs286_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB_FS286
Project Ver : S40A2_LINNEX_20161228
Model Ext   : LINNEX

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1349 MiB
Saved to : C:\Users\SKYNET\Desktop\New folder\SP7731CEB_FS286_sp7731c_fs286_32v4_6.0_S40A2_LINNEX_20161228_LINNEX\
Done!

Elapsed: 00.06.56

Reconnect Power/Cable!

MT6580__Linnex__LX_Black__Linnex__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m

MT6580__Linnex__LX_Black__Linnex__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 450100444C3230313601355B880AA301
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 6102L
[eMMC] : FLASH_CID : 450100444C3230313601355B880AA301
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xA0E63D96DDF6058A7AF63D2D0899294F
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Linnex
ProdName  : Linnex
ProdModel : LX Black
Device    : Linnex
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_esky6580.we.c.m

[Read Ok] : preloader_esky6580_we_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / esky6580_we_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1569 MiB
Scatter saved to : C:\Users\SERVER02\Desktop\New folder\MT6580__Linnex__LX_Black__Linnex__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m\

All done!

Done!
Elapsed: 00:07:57
Reconnect Power/Cable!