Tuesday, June 19, 2018
Symphony V49 HW2 V11 Flash File Free V49_V49_5.1_V49_HW2_V11_V49
Symphony V49 HW2 V11 Flash File Free
V49_V49_5.1_V49_HW2_V11_V49
Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : V49
Model Brand : symphony
Model Device: V49
AndrVersion : 5.1
BaseBand CPU: V49
Project Ver : V49_HW2_V11
Model Ext : V49
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.43.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1878 MiB
Saved to : C:\Users\SERVER02\Desktop\V49_V49_5.1_V49_HW2_V11_V49\
Done!
Elapsed: 00:05:30
Reconnect Power/Cable!
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : V49
Model Brand : symphony
Model Device: V49
AndrVersion : 5.1
BaseBand CPU: V49
Project Ver : V49_HW2_V11
Model Ext : V49
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.43.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1878 MiB
Saved to : C:\Users\SERVER02\Desktop\V49_V49_5.1_V49_HW2_V11_V49\
Done!
Elapsed: 00:05:30
Reconnect Power/Cable!
Key: !JOJlf4GGJw24hPJLbrKkeCAlddDLUi08_n6aL1JCOz0
Pac File
Key: !DGyy5waqdZjDmECh2s5Pg9ydoTHnawru5TYodWpJX4A
Monday, June 18, 2018
Friday, June 15, 2018
Oppo A53 Official Stock Rom
OPPO_OPPO A53_A53_11_A.11_160627_2015-10-01
Operation : Read Firmware
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Firehose Loader...Done
Sending Loader [8936_036.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA : Normal
Reading Device Information...OK
Device : OPPO OPPO A53 [msm8916]
Software : A53_11_A.11_160627, eng.root.20160627.205258 [Mon Jun 27 20:55:15 CST 2016]
Android Ver. : 5.1.1
Patch Level : 2015-10-01
Reading [modem]...Done
Reading [sec]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [hyp]...Done
Reading [hypbak]...Done
Reading [modemst1]...Done
Reading [modemst2]...Done
Reading [oppodycnvbk]...Done
Reading [oppostanvbk]...Done
Reading [LOGO]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [system]...Done
Reading [cache]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [DRIVER]...Done
Reading [userdata]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to : C:\UMTool\QcFire\Read\OPPO_OPPO A53_A53_11_A.11_160627_2015-10-01\
Operation Finished.
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Firehose Loader...Done
Sending Loader [8936_036.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA : Normal
Reading Device Information...OK
Device : OPPO OPPO A53 [msm8916]
Software : A53_11_A.11_160627, eng.root.20160627.205258 [Mon Jun 27 20:55:15 CST 2016]
Android Ver. : 5.1.1
Patch Level : 2015-10-01
Reading [modem]...Done
Reading [sec]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [hyp]...Done
Reading [hypbak]...Done
Reading [modemst1]...Done
Reading [modemst2]...Done
Reading [oppodycnvbk]...Done
Reading [oppostanvbk]...Done
Reading [LOGO]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [system]...Done
Reading [cache]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [DRIVER]...Done
Reading [userdata]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to : C:\UMTool\QcFire\Read\OPPO_OPPO A53_A53_11_A.11_160627_2015-10-01\
Operation Finished.
For Key Subscribe My YouTube Channel Free
YouTube Channel: https://goo.gl/Yb949h
Lenovo K53 S116 Official Stock Rom
LENOVO_Lenovo K53_K53_S116_161115_ROW_2016-06-01
eration : Read Firmware
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM43)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 2A7A0000
OPK_DATA : C94306FF09FC94E60BC36DBEFB7F88648D7764E5313003FECA69404ACB06A874
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_008.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
USERDATA : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information...OK
Device : LENOVO Lenovo K53 [msm8937]
Software : K53_S116_161115_ROW, K53_S116_161115_ROW [Tue Nov 15 09:18:48 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-06-01
Reading [modem]...Done
Reading [sec]...Done
Reading [lksecapp]...Done
Reading [lksecappbak]...Done
Reading [cmnlib]...Done
Reading [cmnlibbak]...Done
Reading [cmnlib64]...Done
Reading [cmnlib64bak]...Done
Reading [keymaster]...Done
Reading [keymasterbak]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [devinfo]...Done
Reading [limits]...Done
Reading [prov32]...Done
Reading [prov32bak]...Done
Reading [kpadA]...Done
Reading [fsc]...Done
Reading [ssd]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [devcfg]...Done
Reading [devcfgbak]...Done
Reading [dsp]...Done
Reading [modemst1]...Done
Reading [modemst2]...Done
Reading [DDR]...Done
Reading [fsg]...Done
Reading [kpadB]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [apdp]...Done
Reading [msadp]...Done
Reading [dpo]...Done
Reading [splash]...Done
Reading [misc]...Done
Reading [keystore]...Done
Reading [config]...Done
Reading [oem]...Done
Reading [mota]...Done
Reading [dip]...Done
Reading [mdtp]...Done
Reading [syscfg]...Done
Reading [mcfg]...Done
Reading [persist]...Done
Reading [cache]...Done
Reading [mrd]...Done
Reading [system]...Done
Reading [preload]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to : C:\UMTool\QcFire\Read\LENOVO_Lenovo K53_K53_S116_161115_ROW_2016-06-01\
Operation Finished.
Module Ver. 2.1
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM43)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 2A7A0000
OPK_DATA : C94306FF09FC94E60BC36DBEFB7F88648D7764E5313003FECA69404ACB06A874
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_008.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
USERDATA : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information...OK
Device : LENOVO Lenovo K53 [msm8937]
Software : K53_S116_161115_ROW, K53_S116_161115_ROW [Tue Nov 15 09:18:48 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-06-01
Reading [modem]...Done
Reading [sec]...Done
Reading [lksecapp]...Done
Reading [lksecappbak]...Done
Reading [cmnlib]...Done
Reading [cmnlibbak]...Done
Reading [cmnlib64]...Done
Reading [cmnlib64bak]...Done
Reading [keymaster]...Done
Reading [keymasterbak]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [devinfo]...Done
Reading [limits]...Done
Reading [prov32]...Done
Reading [prov32bak]...Done
Reading [kpadA]...Done
Reading [fsc]...Done
Reading [ssd]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [devcfg]...Done
Reading [devcfgbak]...Done
Reading [dsp]...Done
Reading [modemst1]...Done
Reading [modemst2]...Done
Reading [DDR]...Done
Reading [fsg]...Done
Reading [kpadB]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [apdp]...Done
Reading [msadp]...Done
Reading [dpo]...Done
Reading [splash]...Done
Reading [misc]...Done
Reading [keystore]...Done
Reading [config]...Done
Reading [oem]...Done
Reading [mota]...Done
Reading [dip]...Done
Reading [mdtp]...Done
Reading [syscfg]...Done
Reading [mcfg]...Done
Reading [persist]...Done
Reading [cache]...Done
Reading [mrd]...Done
Reading [system]...Done
Reading [preload]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to : C:\UMTool\QcFire\Read\LENOVO_Lenovo K53_K53_S116_161115_ROW_2016-06-01\
Operation Finished.
Module Ver. 2.1
For Key Subscribe My YouTube Channel Free
YouTube Channel: https://goo.gl/Yb949h
Oppo A37fw Official Stock Rom
MSM8916__OPPO__OPPO__ANDR_v5.1.1__A37f__A37f__A37f__A37fEX_11.A.28_INT_028_201710081545
Card found : D8B00984 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 2311F761
ID_BLOCK_L : 669EF402AD3926211E739D824D149CAC
ID_BLOCK_L : C8BB05A4A938A223A6117AB3B17C6A51
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!
Brand : OPPO
ProdName : A37f
ProdModel : A37f
Device : A37f
AndroidVer: 5.1.1
SWVersion : A37fEX_11.A.28_INT_028_201710081545
Manufact. : OPPO
QLMxCPU : MSM8916
DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__A37f__A37f__A37f__A37fEX_11.A.28_INT_028_201710081545
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : driver.iso
[Read Ok] : reserve4.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : cdt.mbn
[Read Ok] : gpt_backup2.bin
Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 3094 MiB
Done!
Elapsed: 00:04:23
Reconnect Power/Cable!
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 2311F761
ID_BLOCK_L : 669EF402AD3926211E739D824D149CAC
ID_BLOCK_L : C8BB05A4A938A223A6117AB3B17C6A51
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!
Brand : OPPO
ProdName : A37f
ProdModel : A37f
Device : A37f
AndroidVer: 5.1.1
SWVersion : A37fEX_11.A.28_INT_028_201710081545
Manufact. : OPPO
QLMxCPU : MSM8916
DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__A37f__A37f__A37f__A37fEX_11.A.28_INT_028_201710081545
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : driver.iso
[Read Ok] : reserve4.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : cdt.mbn
[Read Ok] : gpt_backup2.bin
Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 3094 MiB
Done!
Elapsed: 00:04:23
Reconnect Power/Cable!
For Key Subscribe My YouTube Channel Free
YouTube Channel: https://goo.gl/Yb949h
OnePlus One A0001 Official Stock Rom
MSM8974__ONEPLUS__ONEPLUS__ANDR_v4.3__A0001__A0001ROMNewkey_12.A.04_005_140711
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
ERROR : Fail to init protocol!
HINT : Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 801 [MSM8974]
ID_BLOCK_S : 0AA826B3
ID_BLOCK_L : 3030AA54036F949770252F30FF4ACA02
ID_BLOCK_L : 6312BC0F00933B484DA8EDDA28C7D1FA
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8974 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0001C000/00020000/00001000/00001000/00000000
Boot Ok!
Brand : ONEPLUS
Device : A0001
AndroidVer: 4.3
SWVersion : A0001ROMNewkey_12.A.04_005_140711
Manufact. : ONEPLUS
QLMxCPU : MSM8974
DevInfo : MSM8974__ONEPLUS__ONEPLUS__ANDR_v4.3__A0001__A0001ROMNewkey_12.A.04_005_140711
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : dbi.mbn
[Read Ok] : ddr.bin
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : pnvbak.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : lsplash.img
[Read Ok] : driver.iso
[Read Ok] : reserve3.bin
[Read Ok] : reserve4.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8974 / eMMC
Firmware Size : 1599 MiB
Done!
Elapsed: 00:03:02
Reconnect Power/Cable!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
ERROR : Fail to init protocol!
HINT : Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 801 [MSM8974]
ID_BLOCK_S : 0AA826B3
ID_BLOCK_L : 3030AA54036F949770252F30FF4ACA02
ID_BLOCK_L : 6312BC0F00933B484DA8EDDA28C7D1FA
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8974 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0001C000/00020000/00001000/00001000/00000000
Boot Ok!
Brand : ONEPLUS
Device : A0001
AndroidVer: 4.3
SWVersion : A0001ROMNewkey_12.A.04_005_140711
Manufact. : ONEPLUS
QLMxCPU : MSM8974
DevInfo : MSM8974__ONEPLUS__ONEPLUS__ANDR_v4.3__A0001__A0001ROMNewkey_12.A.04_005_140711
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : dbi.mbn
[Read Ok] : ddr.bin
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : pnvbak.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : lsplash.img
[Read Ok] : driver.iso
[Read Ok] : reserve3.bin
[Read Ok] : reserve4.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8974 / eMMC
Firmware Size : 1599 MiB
Done!
Elapsed: 00:03:02
Reconnect Power/Cable!
For Key Subscribe My YouTube Channel
YouTube Channel: https://goo.gl/Yb949h
Subscribe to:
Posts (Atom)